GROUNDTEC SUPPLY THE LARGEST TWIN HEADER FITTED TO AN EXCAVATOR OPERATING IN AUSTRALIA
GTS 4 Diamond Saw cutting sandstone with a 2200 mm blade
GTS 4 Diamond with a 2200 mm blade cutting cleanly in Balmain in Sydney. The customer is NMK Civil.
GTS 4 diamond rock saw in action cutting sandstone on a 30 tonne excavator
GTS 4 diamond rock saw in action. Note the clean cut achieved from this efficient earth moving attachment.
Rammer Rock Breaker Boom System
Rammer offers a comprehensive range of hydraulic breaker booms to enhance the safety, productivity and profitability of crushing operations in mines and quarries around the world.
GroundTec Equipment's GTS-1 Diamond saw, mounted on a 3 ton Takeuchi Mini Excavator.
GroundTec Equipment's GTS-1 Diamond saw mounted on a 3 ton Takeuchi Mini Excavator.
The entire work time involved was reduced from an estimated 8-9 operating days down to a neat 3 days thanks to the GTS 1 diamond saw’s production rate. Such efficiency is just one reason why the GTS saws are becoming a must have attachment for mini excavators in the earthmoving industry.
GTS Diamond Saw in Action on 2.8 ton Mini Excavator
GroundTec Equipment's GTS-1 Diamond saw mounted on a 2.8 ton Takeuchi Mini Excavator.
It just so happens our client was working on a job site next to a builder who got caught out with no excavators on site to help with the footings. Thanks to our client and his GTS-1 Diamond Saw, the job was done in no time!
GTS Diamond Saw with 1400 mm Sandstone blade Cutting Granite
The GTS 2 saw was used to cut granite, a tough material typical of the Illawarra region. The saw is a great earthmoving attachment which can be used in place of hammers on city sites, where vibration and dust are site issues, and where a clean cut is required. The GTS saw was found to be the most productive excavation tool that could be used to break granite in this situation.
GTS Diamond Saw with 1400 mm Sandstone blade
This film shows the GTS diamond rock saw in action cutting sandstone, a common material on Sydney jobsites. The saw can be used on an excavator in confined spaces, will cut where hammering is not feasible because of noise or vibration and will provide a clean cut.
GTS Diamond Saw with Easy change from left to right of boom with our new swivel head
One of the great features of the GTS range of saws is the ease with which you can change the saw from the left to the right side of the boom. The GTS saws are equipped with a swivel head which makes this operation quick and simple, saving operator time and effort.
GTS Diamond Rock Saw at the Sydney Opera House
As part of the redevelopment of the Sydney Opera House forecourt, the GTS diamond rock saw was used on a 14 tonne excavator with an 1800 mm sandstone blade for precision cutting. Rock saws are proving to be a vital hydraulic attachment for excavation contractors.
Rammer's 355 & 777 on a demolition site
Rammer's 355 & 777 shown here being used to demolish the former ministry of justice in the UK
Rammer Large Range Hammer being using to clear a Landslide
Rammer BR1533 Without IBP TVM
GTS Diamond Rock Saw cutting sandstone
The GTS2 diamond rock saw was used to cut sandstone in Sydney on a 5 tonne excavator. The excavator attachment is fitted with dust suppression making it an ideal excavation tool for domestic sites.
Groundtec's Diamond Rock Saw cutting trench
The excavator mounted rock saws are ideal for cutting trenches in roadside and footpaths. In this application, the contractor needed to lay trenches in an urban environment. The advantage of a rock saw over a rock breaker in this situation is being able to start excavating the trench at the desired width.
GTS Diamond saw in action: ready for delivery. New diamond saw and hammer.
GTS Diamond saw in action: GTS 4 with 2200 mm blade cutting a huge basement in sandstone
GTS Diamond saw in action: GTS 4 with 2200 mm blade and off set extension ready to work on 30 t excavator
GTS Diamond saw in action: GTS 2 with 1400 mm blade ready for delivery
GTS Diamond saw in action: GTS 2 with 1400 mm blade in Sydney
GTS Diamond saw in action: GTS 2 with 1400 mm blade cutting depth 600 mm ready for trenching work
GTS Diamond saw in action: GTS 1 with a 1000 mm blade ready to be despatched
GTS Diamond saw in action: great combo. GTS 4 and Rammer BR 3288
GTS Diamond saw in action: deep excavation hole in Sydney CBD. GTS saws cutting walls and Rammer Rock Hammers breaking bulk sandstone
GTS Diamond saw in action: deep cut with GTS 4 in Sydney CBD
TS Diamond saw in action: cutting with GTS 4
GTS Diamond saw in action: cutting concrete 400 ml deep with 12 ton excavator
GTS Diamond saw in action: Concrete cut with GTS 2 1000 mm concrete blade
GTS Diamond saw in action: 25 mtr. deep cut with GTS 4 in sandstone in Sydney CBD
Wolfgang on a Research Trip in Japan
GTS 2 cutting concrete
Rammer Pulveriser ready for delivery
Darling Harbour Demo by Hassarati P/L
Deep Rock Cut in Sydney Sandstone
Not only do our customers like us, most customers are repeat customers, many who own several products from our extensive range. At GroundTec we are known for our great products, extensive range of genuine, in-stock, spare parts and our honest and reliable service.
GroundTec has serviced the industry for over 20 years. We welcome you to chat to our friendly, professional team led by Wolfgang Reinhard.